Independent guides for robot mower owners
Not affiliated with or endorsed by any device manufacturer. All trademarks belong to their respective owners.
Official Mammotion fault/error codes — meaning and manufacturer-recommended fix for each code, cross-checked against six current official user manuals, plus which model lines' manuals don't document fault codes at all.
6 September 2026 MORE →
Mammotion's support KB for both lines still shows 1.30.29.8 as current — real and official reports put it at least two releases further ahead.
6 September 2026 MORE →
LUBA 2 and LUBA 2X drive into obstacles like lawn furniture even with obstacle-avoidance sensitivity set to sensitive — a recurring, corroborated issue present since launch, not tied to any specific update.
5 September 2026 MORE →
A LUBA 2 returned to its charger, shut off, and stopped responding to the power button entirely, two weeks after a firmware update.
5 September 2026 MORE →
LUBA 2 loses RTK connection mid-mow with the RTK station's own light showing normal — a corroborated report, plus the full power-cycle/remap-restore sequence that fixed it.
5 September 2026 MORE →
Mammotion's official Aug 21 and Sep 4 firmware announcements both claim to fix the mower crossing the perimeter/no-go zones. Here's what actually changed between them, and what's been reported since the second fix.
MyRobotDoc
1.30.29.24 → 1.30.29.264 September 2026 MORE →
What changed in 1.15.21.1, the regression it introduced, and how to roll back if it's causing problems on your unit.
1.15.21.1 → previous release (not yet confirmed — see note below)27 May 2026 MORE →
LUBA 2 started driving into flower beds after a firmware update, with no configuration changes made.
23 September 2024 MORE →