Official announcements (firmware releases, version history, and new products), stated factually with sources, not owner-reported problems. See Known issues for those.
Mammotion's next-generation flagship introduces Quad-Vision cameras, 360° LiDAR, independent front-wheel steering, and bidirectional driving. Three models covering 3,000–12,000 m² (¾ to 3 acres); announced September 2026, availability varies by region.
First reported 11 Sep 2026 Last updated 03 Nov 2026
Mammotion's support knowledge base for this line still shows 2.3.27.23 as current, while real and official reports put it at least two releases further ahead.
First reported 13 Aug 2026 Last updated 03 Nov 2026
On 15 August 2026 a Mammotion account listed a September plan: remote control for older mowers, and Skip Row Mode with remote control for the LUBA 3, LUBA mini 2 and YUKA mini 2. Owners call the skip-row turning the Zamboni update. What was said, and how the date moved. Also what staff said about a notification switch.
First reported 15 Aug 2026 Last updated 02 Nov 2026
Mammotion's Swiss-region help centre describes a free replacement of the power supply for some owners, because of the plug on certain supplies. What that FAQ says about why, whether the mower is dangerous and what to do with the old supply; what it does not say (which models, which markets, since when); and what one owner in a German-language forum who received the package reports. We have found no notice for any other market.
First reported 26 Oct 2026 Last updated 30 Oct 2026
Four questions YUKA mini 2 owners asked on Reddit in September and October 2026, and what a Mammotion staff account answered: a warm LiDAR module while charging is normal, DropMow needs enough light, the dashed line points at the first zone, and the side LEDs stay on while docked.
First reported 22 Sep 2026 Last updated 25 Oct 2026
On the afternoon of 23 September 2026 owners in the US, Canada and the UK lost iNavi positioning: the mower stopped, or the app said the RTK station was not ready. For most it came back by the next morning. What they saw, what Mammotion told them to try, and what to do before you reset anything.
First reported 23 Sep 2026 Last updated 24 Oct 2026
What owners are reporting after updating to 2.3.30.39: the multi-point turn fix many were waiting for, early reports of new navigation quirks, and one case that turned out to be an app setting rather than the firmware.
My Robot Doc
2.3.30.39First reported 10 Sep 2026 Last updated 24 Oct 2026
Mammotion's support knowledge base for both lines still shows 1.30.29.8 as current, while real and official reports put it at least two releases further ahead.
First reported 21 Aug 2026 Last updated 24 Oct 2026
Mammotion restored a previously-removed feature in this release, relevant if you're deciding whether to wait for a fix rather than roll back.
1.30.29.20First reported 17 Aug 2026 Last updated 24 Oct 2026
A Swedish news report of a robot mower reversing over a 15-month-old, with no rear sensors and the blades still running (July 5), and two owners describing a child run over during an automated turn (the automatic turns Mammotion calls Multi-point Turn). Neither source names a model in words. The published photograph identifies the machine as a Mammotion LUBA 2 AWD. No manufacturer statement exists, and the EU, the UK and the US have each recalled robot mowers whose blades kept turning when a sensor failed. We assert no cause for either injury.
First reported 05 Jul 2026 Last updated 03 Oct 2026