An authorized Mammotion dealer's step-by-step breakdown of docking/charging failures: contact alignment, the power-supply and charging-station LED codes, ant infestations, and how to tell a bad battery from a bad power supply.
Last updated 03 Nov 2026
Official Mammotion fault/error codes, meaning and manufacturer-recommended fix for each, cross-checked against seven current official user manuals, plus which model lines' manuals don't document fault codes at all.
Last updated 03 Nov 2026
Mammotion's official August 21 and September 4 firmware announcements both claim to fix the mower crossing the perimeter/no-go zones. Here's what actually changed between them, and what's been reported since the second fix.
First reported 29 Aug 2026 Last updated 03 Nov 2026
The mower and its charging station are rated for rain; the power adapter that feeds them is not. Mammotion support told one owner in writing that the adapter has no declared waterproof rating. Owners report adapters dying after months outdoors, one tripping a home's safety switch, and replacements fixing the fault.
First reported 12 Sep 2025 Last updated 01 Nov 2026
LUBA 2 owners report bare, torn patches at corners, around small excluded zones and in front of the charger since the summer 2026 firmware. A Mammotion staff account suggests marking worn areas as no-go zones and changing the mowing angle, and said on 22 September that a new firmware was coming. What was said, and what is not known.
First reported 19 Sep 2026 Last updated 25 Oct 2026
LUBA owners report the mower turning into a thin post, pole or fence post, getting it wedged between the bumper and a front wheel, and rocking and digging without registering a collision. Owners say it has long been possible. What Mammotion's accounts suggest (clearance, a restricted area on the map) and what owners put on posts.
First reported 10 Sep 2026 Last updated 24 Oct 2026
Mammotion's support knowledge base for both lines still shows 1.30.29.8 as current, while real and official reports put it at least two releases further ahead.
First reported 21 Aug 2026 Last updated 24 Oct 2026
Two independent owners report the mower refusing a "channel" path between mapped zones as blocked, one on ground it crosses without trouble during an ordinary mow, the other at a step of about 4 cm. A changelog a forum member pasted for a LUBA 2 update names better obstacle handling in channels, but Mammotion's own LUBA 2 AWD X release logs for April to May 2025 do not.
First reported 13 May 2025 Last updated 24 Oct 2026
An authorized Mammotion dealer's diagnostic walkthrough of the most common cutting-height/blade-lift failure: grass compacting under the blade guard, not a firmware or sensor fault in most cases.
Last updated 24 Oct 2026
"Error detected in the 3D vision module (1425)" has shipped as an official fix on four model lines and been independently owner-reported on four more, with at least five different causes. Here's what's confirmed for each, so you're not chasing the wrong fix.
First reported 15 Jul 2024 Last updated 24 Oct 2026
The mower repeatedly halts during night mowing with a "vision/camera dirty" warning, on two different models, despite the lens being clean and daytime mowing working fine.
First reported 21 Aug 2026 Last updated 03 Oct 2026
An authorized Mammotion dealer's walkthrough of what actually causes a loud or unusual cutting-system noise: worn blade screws, a loose disc nut, trapped debris, or a bearing, in that order of likelihood.
Last updated 08 Sep 2026
The mower gets stuck against obstacles, drives into no-go zones, and fails to return to the charging station, on the latest firmware as of late August 2026.
First reported 31 Aug 2026 Last updated 03 Sep 2026
If yours isn't here, it may not have been reported enough times to confirm yet. That doesn't mean it isn't real.
Many symptoms that look like firmware turn out to be physical — a loose cutting disc, gummed-up wheel shafts, grass buildup, an unlevel charging dock. Cheaper and faster to rule out than a rollback.
Problems confirmed by two or more independent owner reports but not yet pinned to a specific firmware or app version. If yours is there, a new report with version details is what promotes it to a full guide.
Support resolves cases fastest when the report is specific. "It broke after the update," with no version number, is very hard for anyone — including Mammotion — to act on.
My Robot Doc
1.30.29.26). Separate from the app version.Mammotion lists its support channels by region — including a 24/7 live chat — at mammotion.com/pages/contact-us. Regional support email: support-na@ (North America), support-eu@ (Europe), support-apac@ (Asia Pacific).
Found something we don't cover yet? Send us the details — that's how the next owner finds it documented.