My Robot Doc

Guide

A Mammotion update is available: should you install it?

What to check before you install a Mammotion firmware update, what to save first, how Mammotion says to install it, and what to watch for afterwards. Suggestions, not a verdict.

Models
LUBA, YUKA series (general)
Last updated
17 Oct 2026
Affects
Robot body — not the app
LUBA, YUKA series (general)Details
Models
LUBA, YUKA series (general)
Last updated
17 Oct 2026
Affects
Robot body — not the app

What to do next

  1. Before you install, look the new version number up on our known issues and firmware timeline for your model.

    More about this step

    Applies when: the app shows a firmware update waiting for your mower.

    Worked if: you know whether owners have reported a problem with that version, or that nothing has been reported to us yet.

    Didn't work? Next: step 2 — Take screenshots of the version screen, your task settings and...

    Method: this site's own known issues and timeline

  2. Take screenshots of the version screen, your task settings and your map, and write down the date.

    More about this step

    Applies when: you are about to install, whatever the check found.

    Worked if: you have a record of how the mower was set up, for a support case if the update changes something.

    Didn't work? Next: step 3 — Install it the way Mammotion's manuals say: in the app, Device...

    Method: our suggestion: there is no way for an owner to go back to an older body firmware (see the rollback guide)

  3. Install it the way Mammotion's manuals say: in the app, Device Information > Robot Version, on a stable network, and stay in the app without turning the robot off until it finishes.

    Stop and get help if

    the version check says "No Data": that is a separate known problem, see the No Data page.

    More about this step

    Applies when: you have decided to install.

    Worked if: the version screen shows the new number.

    Didn't work? Next: step 4 — Watch the first few runs after the update. Look at the edges and...

    Method: LUBA 3 AWD and LUBA mini 2 AWD user manuals, Update Firmware

  4. Watch the first few runs after the update. Look at the edges and near obstacles, and compare with how it mowed before.

    Stop and get help if

    the mower crosses its boundary, drives into things or its blades behave differently: press STOP and do not run it unattended until support has answered.

    More about this step

    Applies when: the update has installed.

    Worked if: it mows as it did, or you have caught a change early.

    Didn't work? Next: step 5 — Contact Mammotion support. Send your screenshots, the old and...

    Method: our suggestion, from the faults owners have reported after updates

  5. Contact Mammotion support. Send your screenshots, the old and new version numbers and what changed, and ask them to put back the version you had. Then tell us, so the next owner sees it here.

    More about this step

    Applies when: something changed after the update.

    Worked if: the case is with support and on record.

    Method: this page

Robot body — not the app. See our app vs. firmware vs. RTK guide if you're not sure which one you're dealing with.

On this page
  1. What to do next
  2. 1. Check first
  3. 2. Before you update
  4. 3. How Mammotion says to install it
  5. 4. When
  6. 5. After you update
  7. Sources
Suggestions, not a verdict. Some updates fix the very fault you have (see fixed issues). This page helps you decide, and keeps a record in case something changes.

1. Check first

Look the new version number up on our known issues and the firmware timeline. If your version isn't listed, nothing has been reported to us about it yet. That is not the same as a promise that nothing is wrong.

Mammotion's own version lists have gaps. The LUBA 2 and LUBA 2 AWD X and LUBA 3, LUBA mini 2 and YUKA mini 2 pages fill in what we have found.

Not sure whether this is an app update or a mower update? The difference matters, because they are rolled back in different ways.

2. Before you update

Take screenshots of the version screen, your task settings and your map, and write down the date. If the update changes how the mower behaves, that record is your evidence when you contact support.

It matters because you can't go back on your own. In an email an owner posted, Mammotion support said it does not support owner-started firmware downgrades. Two owners did get an older version back, by asking support to push it to them (see the rollback guide).

3. How Mammotion says to install it

The LUBA 3 AWD and LUBA mini 2 AWD manuals give the same three steps12:

  1. In the app, go to Device Information > Robot Version.
  2. Make sure the robot is on a stable network.
  3. While it updates, stay in the app, don't do anything else in it, and don't turn the robot off.

If the version check comes back with "No Data" instead, see the No Data page. The RTK reference station has its own update tool: see the station page.

4. When

Mammotion's LUBA 3 AWD manual says to keep both the robot and the RTK reference station on the latest firmware1. We have no source that says to wait a set time before installing.

Two owners report holding off on firmware updates they didn't need, for months, without trouble (see tips and FAQ). One owner who had turned updates off found the setting changed for them (see the perimeter and blade-stop guide), so it is worth checking that setting now and then.

5. After you update

For the first few runs, watch it at the edges and near obstacles, and compare with how it mowed before. If it crosses its boundary, drives into things or its blades behave differently, press STOP and don't leave it running unattended until support has answered.

If something changed, contact Mammotion support with your screenshots and both version numbers. You can't go back to the old version yourself, but you can ask support to push it back to your mower: the rollback guide says how owners did it. Then tell us what happened, so the next owner finds it here.

Sources

Did this work, or not?

Telling us what happened helps the next owner with the same fault.

Tell us what happened

Fixed it? Share with other owners.

Post directly to Reddit or use link in text, email, Facebook, etc.

Reddit