YUKA mini Vision

6 entries, recently updated first

Reference LUBA 2 AWD, LUBA 2 AWD X, LUBA mini AWD, LUBA mini AWD LiDAR, YUKA, YUKA mini & YUKA mini Vision (see scope note for what's not covered)

Mammotion fault & error code reference

Official Mammotion fault/error codes, meaning and manufacturer-recommended fix for each, cross-checked against seven current official user manuals, plus which model lines' manuals don't document fault codes at all.

Last updated 03 Nov 2026

Known issue YUKA mini 500, YUKA mini 800, YUKA mini Vision 700

YUKA mini: false 'front wheel lifted' and tilt warnings, usually a sticking front wheel

YUKA mini owners report constant "front wheel lifted" or "tilted" warnings on flat or bumpy lawns, some since a firmware update. Mammotion and owners point at the front wheels: a wheel that sticks as it slides up and down reads as lifted. How to check, clean and lubricate them, and when support has sent new wheels.

First reported 05 Jul 2026 Last updated 03 Nov 2026

Known issue YUKA mini series, YUKA, YUKA mini 2, LUBA mini AWD, LUBA 2 (base & AWD X) & LUBA 3 3000

Error 1425 (vision module fault): reported across YUKA, YUKA mini, YUKA mini 2, LUBA mini AWD, LUBA 2 (base & AWD X) & LUBA 3

"Error detected in the 3D vision module (1425)" has shipped as an official fix on four model lines and been independently owner-reported on four more, with at least five different causes. Here's what's confirmed for each, so you're not chasing the wrong fix.

First reported 15 Jul 2024 Last updated 24 Oct 2026

Fixed issue YUKA mini (500/500H, 600/600H, 800/800H) & YUKA mini Vision (700/700H)

YUKA mini: false Error 1425 startup error, fixed in firmware 1.14.2.2304

A false Error 1425 on startup, officially fixed in the same release that also introduced a separate blade-noise issue.

Firmware: 1.14.2.2304
Released: 01 Aug 2025

First reported 01 Aug 2025 Last updated 07 Sep 2026

Known issue YUKA mini (500/500H, 600/600H, 800/800H) & YUKA mini Vision (700/700H)

YUKA mini: firmware 1.15.20.2303, NetRTK activation failure

The RTK antenna stops switching modes after this update, despite the changelog claiming improved remote-connection performance.

Firmware: 1.15.20.2303 → 1.15.6.2300

First reported 30 Apr 2026 Last updated 03 Sep 2026

Known issue YUKA mini (500/500H, 600/600H, 800/800H) & YUKA mini Vision (700/700H)

YUKA mini: firmware 1.14.2.2304, loud/screeching noise at medium blade speed

Loud, screeching noise at medium knife speed appears after this update.

Firmware: 1.14.2.2304

First reported 02 Aug 2025 Last updated 03 Sep 2026

Nothing here matches your symptom?

If yours isn't here, it may not have been reported enough times to confirm yet. That doesn't mean it isn't real.

Do this first: common mechanical causes
Many symptoms that look like firmware turn out to be physical — a loose cutting disc, gummed-up wheel shafts, grass buildup, an unlevel charging dock. Cheaper and faster to rule out than a rollback.
Issues we're watching
Problems confirmed by two or more independent owner reports but not yet pinned to a specific firmware or app version. If yours is there, a new report with version details is what promotes it to a full guide.

What to have ready before you contact Mammotion support

Support resolves cases fastest when the report is specific. "It broke after the update," with no version number, is very hard for anyone — including Mammotion — to act on.

Exact model and variant, including any suffix — e.g. LUBA 2 AWD 5000X vs. 5000 (the "H" suffix means a taller cutting-height range, not a different generation).
Your mower's body firmware version — usually under Device Info / About Device in the app (a longer string like 1.30.29.26). Separate from the app version.
Your companion app version — from the app's own About/Settings screen.
The exact symptom, and what the mower was doing when it started.
Whether it began right after a firmware or app update, and which one.
Any in-app error code, and roughly when it appeared.
The app's event log or diagnostic report, if your model provides one.
Photos or a short video, if the issue is physical (docking, damage, turf).

Mammotion lists its support channels by region — including a 24/7 live chat — at mammotion.com/pages/contact-us. Regional support email: support-na@ (North America), support-eu@ (Europe), support-apac@ (Asia Pacific).

Found something we don't cover yet? Send us the details — that's how the next owner finds it documented.