Guide

LUBA mini AWD LiDAR (1500/1500H): official firmware version history

Every firmware release for this model, as Mammotion lists it in its own release notes.

Models: LUBA mini AWD LiDAR (1500 / 1500H)
Last updated: 05 Sep 2026
Affects: Robot body — not the app
Rolling back from: 1.17.0.4312

LUBA mini AWD LiDAR (1500 / 1500H)Details

Models: LUBA mini AWD LiDAR (1500 / 1500H)
Last updated: 05 Sep 2026
Affects: Robot body — not the app
Rolling back from: 1.17.0.4312

What to do next

Read your version from the app's device info and find it in the list below. The newest published entry is 1.17.0.4312 (April 29, 2026).

More about this step

Applies when: something changed and you want to know whether a fix for it has shipped.

Worked if: you know whether the mower is on the newest published build or behind it.

Didn't work? Next: step 2 — If it is behind, update through the app (the mower body is...

Method: Mammotion's own per-model release-notes hub
If it is behind, update through the app (the mower body is OTA-only) and note the version before and after.

Stop and get help if
the fix you need appears in no published log: nothing here is a rollback, because the body has no manual downgrade path.

More about this step

Applies when: the version is behind, or you are chasing a bug that a later log entry fixes.

Worked if: the mower is on the newest published build, with the version change recorded.

Didn't work? Next: step 3 — If your version is not on this list, tell us the version and...

Method: the release logs cited on this page
If your version is not on this list, tell us the version and what changed. Mammotion's own log jumps seven months for this model, so a field-reported entry is the only thing that can fill it.

More about this step

Applies when: your version is missing from the list, or it fixed something this page does not mention.

Worked if: the official gap gets a field-reported entry instead of staying blank.

Method: this page's own callout and gap note

Robot body — not the app. See our app vs. firmware vs. RTK guide if you're not sure which one you're dealing with.

This page states only what Mammotion's own release-notes hub publishes. No owner-reported issue has been confirmed specifically for this model yet. If you've hit a problem on a LUBA mini AWD LiDAR (1500/1500H), let us know.

Version history, newest first

1.17.0.4312: April 29, 2026¹

Fixed map anomalies. Enhanced positioning stability. Improved iNavi service availability.

1.16.0.4313: April 4, 2026²

Added map editing features to support partial adjustments of existing maps. Enhanced positioning for more stable mapping and navigation.

1.15.18.4310: March 26, 2026³

Optimized slope protection logic so the robot safely retreats to flat ground after long stops on slopes. Expanded obstacle library. Optimized low-temperature charging efficiency and detection accuracy for thin poles. Fixed docking failures caused by low stone curbs, positioning drift in open-field environments, and false water-surface detection for specific objects.

1.14.6.4311: August 28, 2025⁴

Fixed an issue where task areas could not be named. Fixed frequent false 1420 error reports pausing tasks, and false 1425 error reports failing tasks. Fixed collisions with pole-shaped obstacles. Improved detection accuracy of bodies of water.

Gap between logged releases: Mammotion's knowledge base jumps from 1.14.6.4311 (August 28, 2025) straight to 1.15.18.4310 (March 26, 2026), seven months with no logged entry for this model. Given that the knowledge base is already known to silently skip point releases on other Mammotion lines (see the LUBA 3 / mini 2 / YUKA mini 2 gap page), this doesn't necessarily mean nothing shipped in between, just that nothing else is officially published for this stretch. No field-reported version fills that gap yet.

Sources

Did this work, or not?

Telling us what happened helps the next owner with the same fault.

Tell us what happened

Fixed it? Share with other owners.

Post directly to Reddit or use link in text, email, Facebook, etc.